Call Ray on 07825 289 644

Taps

Dripping Tap

In most cases this is caused by overtightening of the tap.  This then damages the rubber washer in the tap.  If the problem persists over a long period, corrosion will happen and the tap may need re-seating or in some cases replacing.

Outside Tap

We will check the washer and replace if necessary.  We can regind the seat in the tap if needed.  If the tap valve is jammed or stuck, we can fix the problem.  In most cases, fitting an external tap to a building is usually quite straight forward.  The process involves drilling a hole through the external wall for the pipe.  Usually it is easiest to fit a tap to the external walls of the kitchen as the mains water usually goes to the cold tap in the sink and this would allow the right water pressure for using a garden hose.

 

Print Friendly, PDF & Email

Contact Address:

Fontwell Drive Reading. RG30 4QR Tel: 07825 289 644 E: info@rpheatingservices.co.uk E: ray@rpheatingservices.co.uk

NICEIC
 
 
bpec

Testimonials

Removal of old electric shower and installation of new one. “Arrived on time and set to work immediately. Job completed efficiently, and area of work tidied properly. Kept to quotation of hourly rate - didn't charge for extra time needed to buy extra copper piping. Very good service.” Customer in Newbury.
READ MORE...